Please follow the below template, it will help us to help you!
Expected Behaviour:
running service pihole-FTL status should return the status of pihole-FTL
Actual Behaviour:
/etc/init.d/pihole-FTL: line 69: status: command not found
Debug Token:
ydyfjp45ok
it appears the code to return the status of pihole-FTL is either missing or broken. line 69 in the script has "status pihole-FTL", but there is no status function in the script
this is a new install of pihole. i had to go through the install script several times in order to get it to finish, as it would just drop to command prompt (which is by design, i know... just makes it difficult to troubleshoot without error messages )
i am able to ping my gateway from pihole server, so not sure why pihole -d shows a gateway issue.
i was able to stop, then start, pihole-FTL (making the status known).
#!/bin/bash
### BEGIN INIT INFO
# Provides: pihole-FTL
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: pihole-FTL daemon
# Description: Enable service provided by pihole-FTL daemon
### END INIT INFO
FTLUSER=pihole
PIDFILE=/var/run/pihole-FTL.pid
get_pid() {
pidof "pihole-FTL"
}
is_running() {
ps "$(get_pid)" > /dev/null 2>&1
}
# Start the service
start() {
if is_running; then
echo "pihole-FTL is already running"
else
touch /var/log/pihole-FTL.log /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole.log
chown pihole:pihole /var/log/pihole-FTL.log /run/pihole-FTL.pid /run/pihole-FTL.port /etc/pihole
chmod 0644 /var/log/pihole-FTL.log /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole.log
su -s /bin/sh -c "/usr/bin/pihole-FTL" "$FTLUSER"
echo
fi
}
# Stop the service
stop() {
if is_running; then
kill "$(get_pid)"
for i in {1..5}; do
if ! is_running; then
break
fi
echo -n "."
sleep 1
done
echo
if is_running; then
echo "Not stopped; may still be shutting down or shutdown may have failed, killing now"
kill -9 "$(get_pid)"
exit 1
else
echo "Stopped"
fi
else
echo "Not running"
fi
echo
}
### main logic ###
case "$1" in
stop)
stop
;;
status)
status pihole-FTL
;;
start|restart|reload|condrestart)
stop
start
;;
*)
echo $"Usage: $0 {start|stop|restart|reload|status}"
exit 1
esac
exit 0
/etc/init.d/dnsmasq, unlike pihole-FTL, does contain a status() function, as seen in the following (entire file in next reply):
status()
{
# Return
# 0 if daemon is running
# 1 if daemon is dead and pid file exists
# 3 if daemon is not running
# 4 if daemon status is unknown
start-stop-daemon --start --quiet --pidfile /var/run/dnsmasq/$NAME.pid --exec $DAEMON --test > /dev/null
case "$?" in
0) [ -e "/var/run/dnsmasq/$NAME.pid" ] && return 1 ; return 3 ;;
1) return 0 ;;
*) return 4 ;;
esac
}
#!/bin/sh
### BEGIN INIT INFO
# Provides: dnsmasq
# Required-Start: $network $remote_fs $syslog
# Required-Stop: $network $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Description: DHCP and DNS server
### END INIT INFO
set +e # Don't exit on error status
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/dnsmasq
NAME=dnsmasq
DESC="DNS forwarder and DHCP server"
# Most configuration options in /etc/default/dnsmasq are deprecated
# but still honoured.
ENABLED=1
if [ -r /etc/default/$NAME ]; then
. /etc/default/$NAME
fi
# Get the system locale, so that messages are in the correct language, and the
# charset for IDN is correct
if [ -r /etc/default/locale ]; then
. /etc/default/locale
export LANG
fi
test -x $DAEMON || exit 0
# Provide skeleton LSB log functions for backports which don't have LSB functions.
if [ -f /lib/lsb/init-functions ]; then
. /lib/lsb/init-functions
else
log_warning_msg () {
echo "${@}."
}
log_success_msg () {
echo "${@}."
}
log_daemon_msg () {
echo -n "${1}: $2"
}
log_end_msg () {
if [ $1 -eq 0 ]; then
echo "."
elif [ $1 -eq 255 ]; then
/bin/echo -e " (warning)."
else
/bin/echo -e " failed!"
fi
}
fi
# RESOLV_CONF:
# If the resolvconf package is installed then use the resolv conf file
# that it provides as the default. Otherwise use /etc/resolv.conf as
# the default.
#
# If IGNORE_RESOLVCONF is set in /etc/default/dnsmasq or an explicit
# filename is set there then this inhibits the use of the resolvconf-provided
# information.
#
# Note that if the resolvconf package is installed it is not possible to
# override it just by configuration in /etc/dnsmasq.conf, it is necessary
# to set IGNORE_RESOLVCONF=yes in /etc/default/dnsmasq.
if [ ! "$RESOLV_CONF" ] &&
[ "$IGNORE_RESOLVCONF" != "yes" ] &&
[ -x /sbin/resolvconf ]
then
RESOLV_CONF=/var/run/dnsmasq/resolv.conf
fi
for INTERFACE in $DNSMASQ_INTERFACE; do
DNSMASQ_INTERFACES="$DNSMASQ_INTERFACES -i $INTERFACE"
done
for INTERFACE in $DNSMASQ_EXCEPT; do
DNSMASQ_INTERFACES="$DNSMASQ_INTERFACES -I $INTERFACE"
done
if [ ! "$DNSMASQ_USER" ]; then
DNSMASQ_USER="dnsmasq"
fi
start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
# /var/run may be volatile, so we need to ensure that
# /var/run/dnsmasq exists here as well as in postinst
if [ ! -d /var/run/dnsmasq ]; then
mkdir /var/run/dnsmasq || return 2
chown dnsmasq:nogroup /var/run/dnsmasq || return 2
fi
start-stop-daemon --start --quiet --pidfile /var/run/dnsmasq/$NAME.pid --exec $DAEMON --test > /dev/null || return 1
start-stop-daemon --start --quiet --pidfile /var/run/dnsmasq/$NAME.pid --exec $DAEMON -- \
-x /var/run/dnsmasq/$NAME.pid \
${MAILHOSTNAME:+ -m $MAILHOSTNAME} \
${MAILTARGET:+ -t $MAILTARGET} \
${DNSMASQ_USER:+ -u $DNSMASQ_USER} \
${DNSMASQ_INTERFACES:+ $DNSMASQ_INTERFACES} \
${DHCP_LEASE:+ -l $DHCP_LEASE} \
${DOMAIN_SUFFIX:+ -s $DOMAIN_SUFFIX} \
${RESOLV_CONF:+ -r $RESOLV_CONF} \
${CACHESIZE:+ -c $CACHESIZE} \
${CONFIG_DIR:+ -7 $CONFIG_DIR} \
${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} \
|| return 2
}
start_resolvconf()
{
# If interface "lo" is explicitly disabled in /etc/default/dnsmasq
# Then dnsmasq won't be providing local DNS, so don't add it to
# the resolvconf server set.
for interface in $DNSMASQ_EXCEPT
do
[ $interface = lo ] && return
done
if [ -x /sbin/resolvconf ] ; then
echo "nameserver 127.0.0.1" | /sbin/resolvconf -a lo.$NAME
fi
return 0
}
stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile /var/run/dnsmasq/$NAME.pid --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
return "$RETVAL"
}
stop_resolvconf()
{
if [ -x /sbin/resolvconf ] ; then
/sbin/resolvconf -d lo.$NAME
fi
return 0
}
status()
{
# Return
# 0 if daemon is running
# 1 if daemon is dead and pid file exists
# 3 if daemon is not running
# 4 if daemon status is unknown
start-stop-daemon --start --quiet --pidfile /var/run/dnsmasq/$NAME.pid --exec $DAEMON --test > /dev/null
case "$?" in
0) [ -e "/var/run/dnsmasq/$NAME.pid" ] && return 1 ; return 3 ;;
1) return 0 ;;
*) return 4 ;;
esac
}
case "$1" in
start)
test "$ENABLED" != "0" || exit 0
log_daemon_msg "Starting $DESC" "$NAME"
start
case "$?" in
0)
log_end_msg 0
start_resolvconf
exit 0
;;
1)
log_success_msg "(already running)"
exit 0
;;
*)
log_end_msg 1
exit 1
;;
esac
;;
stop)
stop_resolvconf
if [ "$ENABLED" != "0" ]; then
log_daemon_msg "Stopping $DESC" "$NAME"
fi
stop
RETVAL="$?"
if [ "$ENABLED" = "0" ]; then
case "$RETVAL" in
0) log_daemon_msg "Stopping $DESC" "$NAME"; log_end_msg 0 ;;
esac
exit 0
fi
case "$RETVAL" in
0) log_end_msg 0 ; exit 0 ;;
1) log_warning_msg "(not running)" ; exit 0 ;;
*) log_end_msg 1; exit 1 ;;
esac
;;
restart|force-reload)
test "$ENABLED" != "0" || exit 1
$DAEMON --test ${CONFIG_DIR:+ -7 $CONFIG_DIR} ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} >/dev/null 2>&1
if [ $? -ne 0 ]; then
NAME="configuration syntax check"
RETVAL="2"
else
stop_resolvconf
stop
RETVAL="$?"
fi
log_daemon_msg "Restarting $DESC" "$NAME"
case "$RETVAL" in
0|1)
sleep 2
start
case "$?" in
0)
log_end_msg 0
start_resolvconf
exit 0
;;
*)
log_end_msg 1
exit 1
;;
esac
;;
*)
log_end_msg 1
exit 1
;;
esac
;;
status)
log_daemon_msg "Checking $DESC" "$NAME"
status
case "$?" in
0) log_success_msg "(running)" ; exit 0 ;;
1) log_success_msg "(dead, pid file exists)" ; exit 1 ;;
3) log_success_msg "(not running)" ; exit 3 ;;
*) log_success_msg "(unknown)" ; exit 4 ;;
esac
;;
dump-stats)
kill -s USR1 `cat /var/run/dnsmasq/$NAME.pid`
;;
systemd-start-resolvconf)
start_resolvconf
;;
systemd-stop-resolvconf)
stop_resolvconf
;;
systemd-exec)
# --pid-file without argument disables writing a PIDfile, we don't need one with sytemd.
# Enable DBus by default because we use DBus activation with systemd.
exec $DAEMON --keep-in-foreground --pid-file --enable-dbus \
${MAILHOSTNAME:+ -m $MAILHOSTNAME} \
${MAILTARGET:+ -t $MAILTARGET} \
${DNSMASQ_USER:+ -u $DNSMASQ_USER} \
${DNSMASQ_INTERFACES:+ $DNSMASQ_INTERFACES} \
${DHCP_LEASE:+ -l $DHCP_LEASE} \
${DOMAIN_SUFFIX:+ -s $DOMAIN_SUFFIX} \
${RESOLV_CONF:+ -r $RESOLV_CONF} \
${CACHESIZE:+ -c $CACHESIZE} \
${CONFIG_DIR:+ -7 $CONFIG_DIR} \
${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}
;;
*)
echo "Usage: /etc/init.d/$NAME {start|stop|restart|force-reload|dump-stats|status}" >&2
exit 3
;;
esac
exit 0
Otherwise I don't think we can add explicit support for this as Wheezy is not supported any longer and crafting up our own status command will overwrite the system default one and that might lead to unforeseeable issues with current versions of Debian (and other supported sytems).
)