I am about to despair about this topic. I read dozens of articles, saw some videos on youtube and finally read this article here. Still, it just doesn't work for me. When I finally do an nslookup on my Raspberry Pi that runs Pi-hole, I end up getting this: pi@raspberrypi4:~ $ nslookup fritz.box Se…

Then the only thing you need to do is edit the domain_name_servers line in the dhcpcd.conf file at the bottom: sudo nano /etc/dhcpcd.conf Change 9.9.9.9 into 127.0.0.1 (the localhost IP where pihole-FTL is also listening) and restart dhcpcd or maybe even reboot: sudo service dhcpcd restart Test…

[image] LordOfTheSnow: Anybody with some tipps how I can at least find out what's going wrong? Have you also tested box as local domain name?

Adding to above, if you run below one on Pi-hole you should be able to see the Local domain name/DNS suffix/search domain that your FB is advertising to the network clients: pi@ph5a:~ $ pihole-FTL dhcp-discover [..] domain-name: "home.dehakkelaar.nl" [..] EDIT: Plus when run nslookup, try to su…

pi@raspberrypi4:~ $ pihole-FTL dhcp-discover Scanning all your interfaces for DHCP servers Timeout: 10 seconds WARN: Could not sendto() in send_dhcp_discover() (/root/project/src/dhcp-discover.c:223): Network is unreachable * Received 548 bytes from eth0:192.168.178.1 Offered IP address: 192.168.…

I dont know which IP is what? 192.168.178.1 --> FB 192.168.178.5 --> ? 192.168.178.9 --> ? And could you rephrase what your expecting pls? If you mean the nslookup in your OP resolving to a NXDOMAIN (non existing domain), your querying the Quad9 public DNS server at 9.9.9.9, configured in your …

I need to have the local hostnames on the Pi where I am running Pi-hole. It works flawlessly on all my other machines, but not on the Pi with the Pi-hole. As far as I understood it, this is "normal" unless you enable conditional forwarding in Pi-hole. Which perfectly makes sense to me. The Pi-hole …

Well... almost... This made it: static domain_name_servers=192.168.178.1 THANKS A LOT FOR YOUR HELP!!!! :grinning: :+1:

If correctly installed, 127.0.0.1 should also work: pi@ph5a:~ $ nslookup pi-hole.net 127.0.0.1 Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: Name: pi-hole.net Address: 178.128.134.214 Because pihole-FTL should be listening on all IP's 0.0.0.0: pi@ph5a:~ $ sud…

Unfortunately the solution with 127.0.0.1 only works if I ping or nslookup the router: pi@raspberrypi4:~ $ nslookup fritz.box Server: 127.0.0.1 Address: 127.0.0.1#53 Name: fritz.box Address: 192.168.178.1 Name: fritz.box Address: fd00::9a9b:cbff:feb6:5d61 Name: fritz.box Addre…

Pi-hole won't touch the DNS settings of its host machine, as that doesn't affect Pi-hole's operation. You are free to configure your RPi's DNS resolution in any way you see fit (e.g. your RPi would have picked up Pi-hole as DNS from your FritzBox DHCP if you had configured your RPi to stick with DH…

[image] LordOfTheSnow: pi@raspberrypi4:~ $ nslookup Philips-Hue-Br2 Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: *** Can't find Philips-Hue-Br2: No answer [image] LordOfTheSnow: This is how it is in /etc/dhcpd.conf: interface eth0 static ip_ad…

Pi-hole Userspace

Pi-hole's host machine can't resolve local domains

Help Community Help

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled