# Too many queries made when 'Conditional Forwarding' is enabled

**URL:** <https://discourse.pi-hole.net/t/too-many-queries-made-when-conditional-forwarding-is-enabled/11828>\
**Category:** Help\
**Tags:** v4-0\
**Created:** [August 13, 2018, 7:40am UTC](https://discourse.pi-hole.net/t/too-many-queries-made-when-conditional-forwarding-is-enabled/11828 "2018-08-13T07:40:21Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![deHakkelaar](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/dehakkelaar/32/674_2.png) [@deHakkelaar](https://discourse.pi-hole.net/u/deHakkelaar)\
**Post date:** [August 13, 2018, 1:13pm UTC](https://discourse.pi-hole.net/t/too-many-queries-made-when-conditional-forwarding-is-enabled/11828/17 "2018-08-13T13:13:29Z")

</div>

If the router doesnt block DHCP and/or DNS for those network segments, it should work.

EDIT: worst case, you can configure a bridge interface on Pi-hole that has a leg/connection to both networks.

EDIT2: below posting describes a bridge setup.  
Though I made a mistake and the WiFi SSID and password should be configured in the wpa\_supplicant config file.

> [@Cant ssh into pi after reboot with pihole installed](https://discourse.pi-hole.net/t/cant-ssh-into-pi-after-reboot-with-pihole-installed/1708/10):
>
> Darn this gave me some headaches bc they changed things again wink Better put the IP on the bridge interface like below. In "/etc/network/interfaces": allow-hotplug eth0 iface eth0 inet manual allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa\_supplicant/wpa\_supplicant.conf wpa-ssid \<YOUR\_SSID\_NAME\> wpa-psk \<PASSWORD\> auto br0 iface br0 inet manual bridge\_ports eth0 wlan0 In "/etc/dhcpcd.conf": interface eth0 nodhcp nodhcp6 interface wlan0 nodhcp nodhcp6 int…

---

_[View the full topic](https://discourse.pi-hole.net/t/too-many-queries-made-when-conditional-forwarding-is-enabled/11828)._