\ **Category:** Closed or Out Of Scope\ **Created:** [January 20, 2017, 6:19am UTC](https://discourse.pi-hole.net/t/raspap-webgui-integration/1394 "2017-01-20T06:19:29Z")\ **Posts on this page:** 6\ **Page:** 1

**Author:** ![shamrage](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/s/b38774/32.png) [@shamrage](https://discourse.pi-hole.net/u/shamrage)\ **Post date:** [January 20, 2017, 6:19am UTC](https://discourse.pi-hole.net/t/raspap-webgui-integration/1394/1 "2017-01-20T06:19:30Z")

It would be a great feature on webgui to add, the "configure client portion" of Raspap Webgui. This is to scan the available hotspot and connect to it. ---

**Author:** ![jacob.salmela](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jacob.salmela/32/8_2.png) [@jacob.salmela](https://discourse.pi-hole.net/u/jacob.salmela)\ **Post date:** [January 21, 2017, 7:06pm UTC](https://discourse.pi-hole.net/t/raspap-webgui-integration/1394/2 "2017-01-21T19:06:21Z")

Are you talking about this? [https://github.com/billz/raspap-webgui](https://github.com/billz/raspap-webgui) ---

**Author:** ![doki](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/doki/32/276_2.png) [@doki](https://discourse.pi-hole.net/u/doki)\ **Post date:** [January 22, 2017, 8:53pm UTC](https://discourse.pi-hole.net/t/raspap-webgui-integration/1394/3 "2017-01-22T20:53:11Z")

It would be a good addition to tools section. Especially " the configure client" and "configure access point" part. Ive been ising raspap webgui on my radpberry pi ang chip sbc. ---

**Author:** ![shamrage](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/s/b38774/32.png) [@shamrage](https://discourse.pi-hole.net/u/shamrage)\ **Post date:** [January 23, 2017, 3:35am UTC](https://discourse.pi-hole.net/t/raspap-webgui-integration/1394/4 "2017-01-23T03:35:54Z")

@jacob.salmela - yes i was referring to that software. I currently use CHIP as my pi-hole AP. My setup is WLAN0 - this connects to the Internet (AP available in the area) WLAN1 - Access Point I setup my chip headless and carry it with me (portable). It was powered by a lipo battery. The reason I ask this, because its convenient to have a web interface to connect my WLAN0 to available AP. right now what i do is access the chip AP (wlan1) and then configure my other interface (WLAN0) to connect to AP. ---

**Author:** ![yubiuser](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/yubiuser/32/12100_2.png) [@yubiuser](https://discourse.pi-hole.net/u/yubiuser)\ **Post date:** [January 29, 2021, 1:27pm UTC](https://discourse.pi-hole.net/t/raspap-webgui-integration/1394/5 "2021-01-29T13:27:15Z")

Closing as out-of-scope. Use Raspap if you need it. ---