Problem identifying devices

[robotab]

Hi,

I have installed Pi-hole in a Raspberry Pi 3B with Docker. Everything works well excepts when Pi-hole identify the devices.

Currently, I have the following:

• Provider's router with DHCP (192.168.3.X).
• Xiaomi router (OpenWRT) connected by cable to the provider's router. This router is on 192.168.4.X and with DHCP. It is mainly to give Wi-Fi signal to certain points of the house where the provider's router does not reach.
• Raspberry Pi connected by cable to the Xiaomi router, i.e. with an IP 192.168.4.123, for example.

All the devices connected to the Xiaomi router do not appear in Pi-hole, only one device appears that does all the queries and that is the Xiaomi router.

Is it possible to identify all the devices individually and not the router?

Thanks!

[jfb]

Why do I only see my router's IP address instead of individual devices in the Top Clients section and Query Log?

A nice feature of Pi-hole is that you can see which network devices are sending out the most DNS queries. For every device that is using Pi-hole as their DNS server, you can also see which DNS queries each one has made. [image] But depending on a few things, you may only see a single host in your Top Clients section, which is not as useful. [image] This isn't detrimental to the performance of your Pi-hole; it just provides you with less insight into what's happening on your network. So w…