# Pihole intermittently stops resolving until hardware reboot

**URL:** <https://discourse.pi-hole.net/t/pihole-intermittently-stops-resolving-until-hardware-reboot/37224>\
**Category:** Help\
**Created:** [August 14, 2020, 9:05pm UTC](https://discourse.pi-hole.net/t/pihole-intermittently-stops-resolving-until-hardware-reboot/37224 "2020-08-14T21:05:41Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Pseudokim](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/p/958977/32.png) [@Pseudokim](https://discourse.pi-hole.net/u/Pseudokim)\
**Post date:** [August 15, 2020, 1:26am UTC](https://discourse.pi-hole.net/t/pihole-intermittently-stops-resolving-until-hardware-reboot/37224/13 "2020-08-15T01:26:16Z")

</div>

> [@503 Service Not Available](https://discourse.pi-hole.net/t/503-service-not-available/37108/26):
>
> dmesg -e | grep -i voltage

Zero returned for that, I'll try it again if/when it plays up again.

I should note, I did swap the power supply with another of the same type when I switched the RasPi running PiHole in an effort to resolve the bug. Same problem, different hardware, different power adaptors, different physical locations (and therefore electrical rings). I doubt this is the issue but I'll check nontheless if the problem persists. Both adaptors are 5V3A.

---

_[View the full topic](https://discourse.pi-hole.net/t/pihole-intermittently-stops-resolving-until-hardware-reboot/37224)._