# Only my router is using Pi-hole

**URL:** <https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658>\
**Category:** Help\
**Created:** [June 20, 2020, 4:07am UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658 "2020-06-20T04:07:41Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![jakekaufman](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jakekaufman/32/16758_2.png) [@jakekaufman](https://discourse.pi-hole.net/u/jakekaufman)\
**Post date:** [June 20, 2020, 4:07am UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/1 "2020-06-20T04:07:41Z")

</div>

## Expected Behaviour:

I expect to see all my devices using pihole to be listed on my network panel on the admin website.

## Actual Behaviour:

All I see is requests made by my router and not other devices. Other devices are listed but have IPv6 numbers and have not made any requests. Also in the debug log I noticed that I can't ping my default gateway. It does seem like pihole is working just maybe all requests are going through to my router before pihole? I'm using a router provided by Starry which has minimal options and there isn't much info about it.

## Debug Token:

[https://tricorder.pi-hole.net/d83l3fiqgm](https://tricorder.pi-hole.net/d83l3fiqgm)

---

<div class="post-metadata">

**Author:** ![Troy\_McClure](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/troy_mcclure/32/3837_2.png) [@Troy\_McClure](https://discourse.pi-hole.net/u/Troy_McClure)\
**Post date:** [June 20, 2020, 7:59am UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/2 "2020-06-20T07:59:29Z")

</div>

This works like expected if you have the the pihole as your Routers DNS and the Clients are using the Router as their DNS

---

<div class="post-metadata">

**Author:** ![yubiuser](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/yubiuser/32/12100_2.png) [@yubiuser](https://discourse.pi-hole.net/u/yubiuser)\
**Post date:** [June 20, 2020, 9:45am UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/3 "2020-06-20T09:45:46Z")

</div>

> [@jakekaufman](#):
>
> I expect to see all my devices using pihole to be listed on my network panel on the admin website.

Therefore you have to distribute pihole's IP as DNS server via DHCP. This has to be configured at your router. Once you did, you have to de/reconnect your clients to the network to pickup the new settings.

> [@jakekaufman](#):
>
> noticed that I can't ping my default gateway

This indicates a network configuration erorr.

> [@jakekaufman](#):
>
> Other devices are listed but have IPv6 numbers and have not made any requests

Depending on what kind of IPv6 addresses that are your router might assign global IPv6 addresss to your devices. They could use them to circumvent pihole and query another DNS server. Do you need IPv6? If not, turn it of in your router or use ULA

> [@Use IPv6 ULA addresses for Pi-hole](https://discourse.pi-hole.net/t/use-ipv6-ula-addresses-for-pi-hole/2127):
>
> Many users have reported that frequently changing IPv6 addresses cause page load to be slow or even prevent from working at all. The issues can be fixed by updating the IPv6 address in /etc/pihole/setupVars.conf followed by a run of pihole -g. However, this solution turns out to be very inconvenient since it might be necessary to change the IPv6 address on a regular basis (maybe even multiple times a day). An alternative approach we are currently looking into is the usage of ULA addresses which…

---

<div class="post-metadata">

**Author:** ![jakekaufman](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jakekaufman/32/16758_2.png) [@jakekaufman](https://discourse.pi-hole.net/u/jakekaufman)\
**Post date:** [June 20, 2020, 1:14pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/4 "2020-06-20T13:14:03Z")

</div>

So the weird thing is that I don't have IPv6 available on my router. My setup is: ISP Router [Starry] (which I can't change because any other router won't work.) \> [TP-Link Deco S4 Mesh Wifi] Routers running in bridge mode. All my devices have static IPv4 addresses. I have disconnected and reconnected clients/rebooted my router and still no change.

Also when I run dig I get my main router's IP as the DNS server running through port 53.

```auto
dig google.com

; <<>> DiG 9.10.6 <<>> google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 50450
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
;; QUESTION SECTION:
;google.com. IN	A

;; ANSWER SECTION:
google.com. 164	IN	A	142.250.68.110

;; Query time: 23 msec
;; SERVER: 192.168.99.1#53(192.168.99.1)
;; WHEN: Sat Jun 20 05:59:16 PDT 2020
;; MSG SIZE rcvd: 55

```

---

<div class="post-metadata">

**Author:** ![jakekaufman](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jakekaufman/32/16758_2.png) [@jakekaufman](https://discourse.pi-hole.net/u/jakekaufman)\
**Post date:** [June 20, 2020, 2:40pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/5 "2020-06-20T14:40:32Z")

</div>

Well after much searching and fooling around I think what is happening is that my router is taking all the requests from my devices and sending them to PiHole. This causes PiHole to display only my routers IP in the network tab of the admin panel. So PiHole is working but I can’t get an accurate picture of what devices are doing what. Hope this helps someone out, thanks for all the help.

---

<div class="post-metadata">

**Author:** ![jfb](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jfb/32/4332_2.png) [@jfb](https://discourse.pi-hole.net/u/jfb)\
**Post date:** [June 20, 2020, 2:53pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/6 "2020-06-20T14:53:04Z")

</div>

> [@Why do I only see my router's IP address instead of individual devices in the Top Clients section and Query Log?](https://discourse.pi-hole.net/t/why-do-i-only-see-my-routers-ip-address-instead-of-individual-devices-in-the-top-clients-section-and-query-log/3653):
>
> A nice feature of Pi-hole is that you can see which network devices are sending out the most DNS queries. For every device that is [using Pi-hole as their DNS server](https://discourse.pi-hole.net/t/how-do-i-configure-my-devices-to-use-pi-hole-as-their-dns-server/245), you can also see which DNS queries each one has made. But depending on a few things, you may only see a single host in your Top Clients section, which is not as useful. This isn't detrimental to the performance of your Pi-hole; it just provides you with less insight into [what's happening on your network](https://pi-hole.net/2017/02/22/what-really-happens-on-your-network-find-out-with-pi-hole/). So w…

---

<div class="post-metadata">

**Author:** ![yubiuser](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/yubiuser/32/12100_2.png) [@yubiuser](https://discourse.pi-hole.net/u/yubiuser)\
**Post date:** [June 21, 2020, 7:21pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/7 "2020-06-21T19:21:18Z")

</div>

Maybe it would be helpful if you let us know the brand and model of your router. So others with the same model might find this topic and see that the router intercepts DNS traffic.

---

<div class="post-metadata">

**Author:** ![jakekaufman](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jakekaufman/32/16758_2.png) [@jakekaufman](https://discourse.pi-hole.net/u/jakekaufman)\
**Post date:** [June 21, 2020, 7:51pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/8 "2020-06-21T19:51:39Z")

</div>

Sure! It’s the Starry Launch Router.

---

<div class="post-metadata">

**Author:** ![yubiuser](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/yubiuser/32/12100_2.png) [@yubiuser](https://discourse.pi-hole.net/u/yubiuser)\
**Post date:** [June 21, 2020, 7:57pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/9 "2020-06-21T19:57:51Z")

</div>

Would it be an option to disable DHCP on this router and use pihole's DHCP server?

---

<div class="post-metadata">

**Author:** ![jakekaufman](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jakekaufman/32/16758_2.png) [@jakekaufman](https://discourse.pi-hole.net/u/jakekaufman)\
**Post date:** [June 23, 2020, 7:34pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/10 "2020-06-23T19:34:34Z")

</div>

No you can't and its proprietary to the ISP. The only way to get around would be to use a second router but then you run into double nat and etc.

---

<div class="post-metadata">

**Author:** ![yubiuser](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/yubiuser/32/12100_2.png) [@yubiuser](https://discourse.pi-hole.net/u/yubiuser)\
**Post date:** [June 23, 2020, 8:15pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/11 "2020-06-23T20:15:47Z")

</div>

Can you at least modify the DHCP range on the router? You could limit it to one address (and make a static assignment to the device hosting pihole) and than turn on pihole's DHCP for all other devices.

---

<div class="post-metadata">

**Author:** ![jakekaufman](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/jakekaufman/32/16758_2.png) [@jakekaufman](https://discourse.pi-hole.net/u/jakekaufman)\
**Post date:** [June 23, 2020, 9:08pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/12 "2020-06-23T21:08:18Z")

</div>

Yeah that could work!

---

<div class="post-metadata">

**Author:** ![system](https://discourse.pi-hole.net/uploads/default/original/3X/7/c/7c8792f649eeb921c5d2b4c41564ffa873d9a2b8.png) [@system](https://discourse.pi-hole.net/u/system)\
**Post date:** [July 14, 2020, 9:19pm UTC](https://discourse.pi-hole.net/t/only-my-router-is-using-pi-hole/34658/13 "2020-07-14T21:19:23Z")

</div>

This topic was automatically closed 21 days after the last reply. New replies are no longer allowed.