How do I install Pi-hole on a Synology NAS?

I was trying to free up the port 80 in DiskStation and use Pi-hole in its default installation.

Ok, sorry I didn't read it that way. :slight_smile:

I'm not sure what the status on the detection of the required binary for pihole-FTL is. Can anyone who thinks that changes are required give me a short update on this?

works for me perfect, but edited S99pihole.sh for autorstart didn´t.

New Synology Category For Your Topics

Anyone following this post, we have seen several users asking about Synology and Pi-hole on this single thread. To that end, we have made a new a category for you to post Synology-related things so it is easier to read and disseminate information.

While we don't officially support this system, the community is very helpful and now you have a better place to collaborate.

2 posts were split to a new topic: Editing limitation?

Now I cant start dnsmaq. Beause port 53 is in use by some Avahi-Daemon. Anyone know workaround? Or How to stop Avahi? Thanks

@bakman2 You should be okay to edit the OP if you would like to.

I just did the installation on my DS411J
But when i load up the webpage i get no graphs and it says Lost connection to API and FTL Offline.
I couldn't see any errors when i started everything.

The only thing that looks out of place is when i run with -D

::: ---= Daemon Process Information
::: Checking 4711 port for pihole-FTL listener.
::: Failure: IPv4 Port not in use

DS411J
DSM 6.1.1-15101
Python 2.7.13-16
Chroot 8.4-7

Ill try installing on my DS413J later today and see if it works there.

Problem found.

this file is updated, you need to add the lines to stop/start FTL
https://gist.githubusercontent.com/bakman2/dcfe3fdfd02c9ff8326bbf35da539f27/raw/0c59b7b62b0d351276895744e6d0750c8baf5be5/gistfile1.txt

FIXED!! This problem.

With this instruction I managed to install Pi-hole on my DS916+ but FTL stays offline.

The issues I have:

  • I get no result after
    ---= Detecting installed OS Distribution
    ---= Checking processor variety
    Checking 4711 port for pihole-FTL listener.
    ::: Failure: IPv4 Port not in use
  • FTL is not starting (FTL is offline)

Questions:

  • Is this Pi-hole compatible with my DS916+?
  • Should I fix this 4711 port issue?

I tried repairing pihole but that didn't work.

Here is the debug log:

::: Beginning Pi-hole debug at Sun Jun 25 13:03:32 CEST 2017!
:::
::: This process collects information from your Pi-hole, and optionally uploads
::: it to a unique and random directory on tricorder.pi-hole.net.
:::
::: NOTE: All log files auto-delete after 48 hours and ONLY the Pi-hole developers
::: can access your data via the given token. We have taken these extra steps to
::: secure your data and will work to further reduce any personal information gathered.
:::
::: Please read and note any issues, and follow any directions advised during this process.
:::
::: ---= Detecting Installed Package Versions:
::: Pi-hole: v3.1 (master:v3.1-0-gecde222)
::: Pi-hole Dashboard: v3.1 (master:v3.1-0-gf204b71)
::: lighttpd/1.4.35
::: PHP 5.6.30-0+deb8u1 (cli) (built: Feb 8 2017 08:50:21)
:::
::: ---= Detecting existence of /etc/pihole/setupVars.conf:
::: File exists, parsing...done and was successfully sourced
:::
::: ---= Detecting installed OS Distribution
:::
::: ---= Checking processor variety
:::
::: ---= Checking IPv6 Stack
::: IPv6 addresses located on eth0
::: No gateway detected.
:::
::: ---= Checking IPv4 Stack
::: IPv4 addresses located on eth0
::: Pinging default IPv4 gateway: ::: Gateway responded.
::: Pinging Internet via IPv4: ::: Query responded.
:::
::: ---= Daemon Process Information
::: Checking http port for lighttpd listener.
::: Correctly configured.
:::
::: ---= Daemon Process Information
::: Checking domain port for dnsmasq listener.
::: Correctly configured.
:::
::: ---= Daemon Process Information
::: Checking 4711 port for pihole-FTL listener.
::: Failure: IPv4 Port not in use
:::
::: ---= Processes Check
::: Logging status of lighttpd, dnsmasq and pihole-FTL...
:::
::: ---= Resolver Functions Check (IPv4)
::: Checking for necessary lighttpd files.
:::
::: ---= Detecting existence of /etc/lighttpd/lighttpd.conf:
::: File exists, parsing...done
:::
::: ---= Detecting existence of /var/log/lighttpd/error.log:
::: File exists, parsing...done
:::
:::
::: ---= Detecting existence of /etc/dnsmasq.conf:
::: File exists, parsing...done
:::
::: ---= Detecting contents of /etc/dnsmasq.d/*:
:::
::: ---= File /etc/dnsmasq.d/01-pihole.conf found
::: Parsing...done
:::
::: ---= File /etc/dnsmasq.d/README found
::: Parsing...done
:::
:::
::: ---= Detecting existence of /etc/pihole/whitelist.txt:
::: File exists, parsing...done
:::
::: ---= Detecting existence of /etc/pihole/blacklist.txt:
::: /etc/pihole/blacklist.txt not found!
:::
::: ---= Detecting existence of /etc/pihole/adlists.list:
::: File exists, parsing...done
:::
::: ---= Analyzing gravity.list
:::
::: ---= Analyzing pihole.log
:::
::: ---= Analyzing pihole-FTL.log
::: Warning: No pihole-FTL.log file found!
::: Warning: No pihole-FTL.log file found!
:::
::: --= User Action Required =--
::: Try loading a site that you are having trouble with now from a client web browser..
::: (Press CTRL+C to finish logging.)
:::
::: ---= pihole.log
::: Logging will automatically teminate in 60 seconds
::: 60 seconds left.
::: 55 seconds left.
::: 50 seconds left.
::: 45 seconds left.
::: 40 seconds left.
::: 35 seconds left.
::: 30 seconds left.
::: 25 seconds left.
::: 20 seconds left.
::: 15 seconds left.
::: 10 seconds left.
::: 5 seconds left.
::: Finshed debugging!

Or should I place this on the GitHub forum?

I can start FTL with /usr/bin/pihole-FTL but when I reboot my Synology, Pi-hole auto-restart but FTL doesn't, I've tried to add the two lines and then type : mv gistfile1.txt /usr/local/etc/rc.d/S99pihole.sh but I get : mv: cannot stat ‘gistfile1.txt’: No such file or directory

and FTL doesn't auto-start

Thanks for help

Why are you moving "gistfile1.txt" ?

It's one of the 2 commands in the autostart tutorial

Did the wget work? Doesn't sound like it.

Seems to

I did this cmd : cd;wget https://gist.githubusercontent.com/bakman2/dcfe3fdfd02c9ff8326bbf35da539f27/raw/0c59b7b62b0d351276895744e6d0750c8baf5be5/gistfile1.txt

and got in bottom lines :

Connecting to gist.githubusercontent.com (gist.githubusercontent.com)|151.101.0.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 984 [text/plain]
Saving to: ‘gistfile1.txt.1’

gistfile1.txt.1 100%[=====================>] 984 --.-KB/s in 0s

2017-06-26 19:48:01 (15.0 MB/s) - ‘gistfile1.txt.1’ saved [984/984]

It saves it as .1 thus the gistfile1.txt exists.
Check the directory where you do the mv from.

Yes I noticed that but even when i modify (mv gistfile1.txt.1 /usr/local/etc/rc.d/S99pihole.sh)

I get :
mv: cannot move ‘gistfile1.txt.1’ to ‘/usr/local/etc/rc.d/S99pihole.sh’: No such file or directory

Check the file; permissions, owner.