Hi guys, I'm very satisfied with the use of Pi-Hole with Raspberry Pi 4 and now I would like to integrate the use of DoH Cloudflared in Docker. Can anyone tell me if the items I have set are right? Thank you! this i the stack of my pihole version: "2" services: pihole: container_name: piho…

I have found a solution and write a stack for use Pi-Hole and Cloudflared below but before two points: before start on docker create a network direct connect with our local lan so in my case, opened terminal and digit: docker network create -d macvlan \ --subnet=192.168.178.0/24 \ --gateway=1…

I have stopped using the cloudflared proxy as my DoH interface and went to DNSCRYPT. I have been running this way over 6 months and haven't had any issues like I had with the cloudflared proxy. Here is my commented yaml file for docker-compose. You can use it as a template. You may want to do so…

Hi @RonV42 thanks for your reply, I have some question: ipv4_address: I need to put internal docker ip or router ip? I have for container ip like 172.20.x.x to 172.27.x.x, in particular Pihole network is 172.26.0.2. same questo for ServerIP domain name I don't know what insert here pihole_network…

since you are going to be using macvlan you will need to use addresses from the network the host is using for example if your host is 192.168.1.10 you need to pick addresses for both the pi.hole and the dnscrypt that isn't used by other devices in the 192168.1.0 network. I usually leave a block of …

@RonV42 can you check this stack? sorry for my noob question.. Version: '2' services: pihole: container_name: pihole image: pihole/pihole:latest hostname: pihole domainname: somedomain.com # what insert here? my router is 192.168.178.1 named fritz.b…

I did some clean up and added more comments. You still need to provide IP address for your router and the macvlan network IP address for IPAM I made some suggestions in the comments: Version: '2' services: pihole: container_name: pihole image: pihole/pihole:latest …

Hi @RonV42 thanks again, I have adjust stack, only two questions: dns1 and 2 in env are correct? only for recap my raspi have from router 192.168.178.44 and in docker networks named "pihole_default" it get 172.26.0.2/16 - gateway .1 and subnet .0/16, now on my router I have free .45 .46 .47 etc. i…

What does your docker compose up command look like and what exactly is the output of it? I see nowhere within the configuration file any address of 192.168.17.1...is anything in your network address with 192.168.17.x?

@RonV42 my error sorry I mean 192.168.178.1

what IP address is assigned to the eth0 interface of the host? Can you do a ifconfig?

as I mentioned before eth0 (raspberry) have static ip on router .44 I need to put on ipam gateway?

Pi-hole Userspace

Help for configure DNS-Over-Https with Pi-Hole and Cloudflared in Docker

General Customizing Pi-hole