# Hardware requirements to set up Pi-Hole - basic basic basic

**URL:** <https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967>\
**Category:** Community How-to's\
**Created:** [April 18, 2018, 6:29pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967 "2018-04-18T18:29:31Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![peic](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/p/9de0a6/32.png) [@peic](https://discourse.pi-hole.net/u/peic)\
**Post date:** [April 18, 2018, 6:29pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/1 "2018-04-18T18:29:31Z")

</div>

Hi. I am a total newbie, so please bear with me.

I'm very interested in using Pi-Hole as a network-wide ad blocker at home.

I have a Netgear Nighthawk R7000 router and run Windows 10 on my main PC.

What are my hardware requirements to get this to work? Do I have to buy a Raspberry Pi?

If I have to buy a Pi, how do I hook it up physically to my system?

Thanks for the newbie help.

---

<div class="post-metadata">

**Author:** ![RamSet](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/ramset/32/3497_2.png) [@RamSet](https://discourse.pi-hole.net/u/RamSet)\
**Post date:** [April 18, 2018, 6:35pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/2 "2018-04-18T18:35:05Z")

</div>

You can run it on a Pi Zero.

I recommend a Pi Zero W so that you can use the built it WiFi module.

Once you install Pi-hole on the raspberry, connect it to your Nighthawk's WiFi SSID, and use the pi zero's IP as your DNS (on your devices) and you're set.

Easy setup 🙂

As for supported devices and environments, check out Installation on:

> **[Pi-hole – Network-wide Ad Blocking](https://pi-hole.net/)**

 ![image](https://discourse.pi-hole.net/uploads/default/original/2X/6/6337b504e535ce45192e16b02414754a38e3b36d.jpg)

---

<div class="post-metadata">

**Author:** ![peic](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/p/9de0a6/32.png) [@peic](https://discourse.pi-hole.net/u/peic)\
**Post date:** [April 18, 2018, 7:37pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/3 "2018-04-18T19:37:57Z")

</div>

This is helpful. Thanks.

So it sounds like I have to connect the Pi to the router via WiFi and keep it on at all times, correct?

Do you have any tips for how to secure that connection so someone doesn't find the Pi online and hack in behind my firewall?

Thanks again.

---

<div class="post-metadata">

**Author:** ![RamSet](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/ramset/32/3497_2.png) [@RamSet](https://discourse.pi-hole.net/u/RamSet)\
**Post date:** [April 18, 2018, 7:55pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/4 "2018-04-18T19:55:24Z")

</div>

Yes. That is correct. The raspberry pi zero is the size of a matchbox and you can power it from a good USB charger, like a mobile phone charger that provides more than 1A.

It's extremely small footprint and extremely low power consumption. Dirt cheap too. The MicroSD card for it might cost more.

And yes, you'd have to connect it to your WiFI in order for it to resolve DNS queries using upstream DNS servers.

As for security, as long as you don't open any ports to the public from your Nighthawk pointing to the Raspberry (port forwarding), you should be fine. No one would be able to reach it from the "outside", it will stay contained within your LAN.

---

<div class="post-metadata">

**Author:** ![peic](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/p/9de0a6/32.png) [@peic](https://discourse.pi-hole.net/u/peic)\
**Post date:** [April 18, 2018, 7:57pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/5 "2018-04-18T19:57:38Z")

</div>

OK, I look forward to giving it a try. Thanks!

---

<div class="post-metadata">

**Author:** ![nero355](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/nero355/32/54774_2.png) [@nero355](https://discourse.pi-hole.net/u/nero355)\
**Post date:** [April 19, 2018, 5:54pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/6 "2018-04-19T17:54:27Z")

</div>

> [@RamSet](#):
>
> The raspberry pi zero is the size of a matchbox and you can power it from a good USB charger, like a mobile phone charger that provides more than 1A.

NO NO NO and just NO!!!

I have seen soo many issues because people want to "cheap out" by not buying the official Raspberry Pi powersupply!

PLEASE : Just buy the official adapter for the Raspberry Pi and a decent Samsung/Sandisk/Transcend/Lexar microSDHC/microSDXC card!

It's worth it! 👍🏻👍🏻

---

<div class="post-metadata">

**Author:** ![peic](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/p/9de0a6/32.png) [@peic](https://discourse.pi-hole.net/u/peic)\
**Post date:** [April 19, 2018, 6:00pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/7 "2018-04-19T18:00:21Z")

</div>

I think I bought a kit that includes the case, Pi, power supply, etc. So I should be good. Thanks!

---

<div class="post-metadata">

**Author:** ![RamSet](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/ramset/32/3497_2.png) [@RamSet](https://discourse.pi-hole.net/u/RamSet)\
**Post date:** [April 19, 2018, 7:36pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/8 "2018-04-19T19:36:20Z")

</div>

> [@nero355](#):
>
> NO NO NO and just NO!!!

While I agree that a Raspberry Pi power source is recommended, you can get the same experience by using a 3-rd party power supply as long as it provides enough "juice".

I personally have a good experience with non Raspberry Pi power supplies. I’m running 4 Raspberry Pi devices all powered from a non Raspberry Pi recommended power supply (granted, it's an 8Amp USB power source) .  
You do have to to use a 2A power supply (per Raspberry) if you use the GPIO for powering peripherals (sensors, LEDs etc.) or if you plan to connect a pi camera to it.

It is in the end, the users choice with what he/she uses to power the pi.

Again, **if it is a low amperage power supply** the pi will experience sub-par performance.

As fo the SD card, I agree.  
A well established MicroSd will outperform any nameless ones that are out there.

---

<div class="post-metadata">

**Author:** ![nero355](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/nero355/32/54774_2.png) [@nero355](https://discourse.pi-hole.net/u/nero355)\
**Post date:** [April 23, 2018, 5:51pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/9 "2018-04-23T17:51:52Z")

</div>

> [@RamSet](#):
>
> While I agree that a Raspberry Pi power source is recommended, you can get the same experience by using a 3-rd party power supply as long as it provides enough “juice”.

It's not that simple!

For example : A Qualcomm QC charger can supply enough power but the Raspberry Pi doesn't "speak" the QC protocol so the charger is useless for it 😉

I have seen a lot of 3rd party charger issues which could have been solved with simply buying the original charger for let's say 12,50 USD or so...

---

<div class="post-metadata">

**Author:** ![DanSchaper](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/danschaper/32/91_2.png) [@DanSchaper](https://discourse.pi-hole.net/u/DanSchaper)\
**Post date:** [April 23, 2018, 5:54pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/10 "2018-04-23T17:54:16Z")

</div>

Don't forget another very important piece of equipment, the cord/cable. If you buy a modular power supply but use a cheap USB cable that is just aluminium foil and has a very high voltage drop then it doesn't matter how beefy the supply is, it will never get to the SBC.

---

<div class="post-metadata">

**Author:** ![peic](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/p/9de0a6/32.png) [@peic](https://discourse.pi-hole.net/u/peic)\
**Post date:** [April 23, 2018, 5:59pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/11 "2018-04-23T17:59:33Z")

</div>

Thanks to all for the good tips. I actually purchased a RPi kit that includes the charger, so I'm pretty sure I'll be all set.

---

<div class="post-metadata">

**Author:** ![dangson](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/dangson/32/4267_2.png) [@dangson](https://discourse.pi-hole.net/u/dangson)\
**Post date:** [July 17, 2018, 10:49am UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/13 "2018-07-17T10:49:47Z")

</div>

I'm running my Pi with a cheap 0.7A power adapter and it working good, of course no HDMI or keyboard or mouse, just Ethernet only. 😅

---

<div class="post-metadata">

**Author:** ![RamSet](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/ramset/32/3497_2.png) [@RamSet](https://discourse.pi-hole.net/u/RamSet)\
**Post date:** [July 19, 2018, 1:54pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/14 "2018-07-19T13:54:28Z")

</div>

That’s really at the lower exteme end of the requirements. If you ever need to start using the GPIO pins and/or even add an USB mouse or keyboard, you’ll need an upgrade from that phone charger you use 🙂

---

<div class="post-metadata">

**Author:** ![Martie071](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/m/f0a364/32.png) [@Martie071](https://discourse.pi-hole.net/u/Martie071)\
**Post date:** [September 19, 2018, 9:59am UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/15 "2018-09-19T09:59:34Z")

</div>

Easier and cheaper: Download virtualbox and install pi-hole on a Ubuntu Server Virtual machine. Took me 30 minutes and it is working. Only downside: you need a device that is continuously powered on.

---

<div class="post-metadata">

**Author:** ![peic](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/p/9de0a6/32.png) [@peic](https://discourse.pi-hole.net/u/peic)\
**Post date:** [September 19, 2018, 12:01pm UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/16 "2018-09-19T12:01:57Z")

</div>

Thanks. Already bought rp.

---

<div class="post-metadata">

**Author:** ![yubiuser](https://discourse-cdn.pi-hole.net/user_avatar/discourse.pi-hole.net/yubiuser/32/12100_2.png) [@yubiuser](https://discourse.pi-hole.net/u/yubiuser)\
**Post date:** [December 4, 2020, 5:47am UTC](https://discourse.pi-hole.net/t/hardware-requirements-to-set-up-pi-hole-basic-basic-basic/8967/17 "2020-12-04T05:47:46Z")

</div>

Split this topic on December 4, 2020, 5:47am UTC

A post was split to a new topic: [Help setting up pihole bare metal installation](https://discourse.pi-hole.net/t/help-setting-up-pihole-bare-metal-installation/41213)
