Hello guys, I've just disabled the DHCP and DHCPv6 servers on the ISP's router as in DHCPv6 it was not assigning the desired address to use as a DNS (in this case the local DNS provided by Pi-hole). After enabling the DHCP server in Pi-hole, the IPv4 DNS configuration that it assisgns to the clien…

Note that the majority of client OSs would prefer autoconfiguration via NDP/RA/SLAAC, rather than joining a network via Stateful or Stateless DHCPv6. Some OSs like Android do even lack support for DHCPv6 completely. With IPv6 auto configuration, it's a router's job to advertise network configuratio…

Hello Bucking_Horn, Thank you a lot for your fast response. After reading it I understand that the IPv6 IP assignation and DNS configuratiok has to be done on the router side. I will look for more information about the protocols that you mentioned. Have a really nice day!

Maybe below can come in handy: [image] Pi-hole not working Help You can check what DNS server(s) is/are advertised via router IPv6 RA (Router Advertisement) if install below on the Pi-hole or other Linux host: sudo apt install ndisc6 FYI: $ apt show ndisc6 …

Configure DNS address with DHCPv6

Help Community Help

deHakkelaar August 14, 2024, 7:20pm 4

Maybe below can come in handy: