Please follow the below template, it will help us to help you! Expected Behaviour: I can't get the client hostnames to show in Pi-hole Actual Behaviour: Only IP Addresses showing Ok, so here's the setup: VLAN's -> Pi-hole -> OpenDNS (In that order) My router is a Ubiquiti UniFi Security Gateway …

[image] coalfield: The only thing I am not sure of with your settings is what you have as the DNS servers in pihole. Do you only have your custom upstream server and conditional forwarding on, or do you have have any of the DNS boxes ticked. I have tried with both mind and still no luck. Without…

Fixed! Just Changed the order to Pi-hole -> USG Router -> OpenDNS

I pointed Pi-hole to the router (USG), then the router points to my selected DNS servers. And then I tinkered with the forwarding of Non-FQDN settings and then the other one to forward reverse lookups. 85% of my clients’ hostnames now show up in the dashboard :blush:

You mean , in pihole you used Conditional Forwarding, then router ip You have a screenshot or so ???

@VenimK Here's what I've got: [image] [image] And then in the UniFi Controller, set the upstream DNS servers for the WAN so that the LAN and all subsequent VLANs use OpenDNS through Pi-hole.

@jaykepeters I am having exactly the same issue as you and have tried EVERYTHING! I am not sure if I am following right but what i have is: USG -> Networks -> WAN -> DNS Servers 1.1.1.1, 9.9.9.9 USG -> Networks -> LAN -> DHCP Name Server: 192.168.x.3 [my pihole] Pihole -> Settings -> DNS -> Upst…

Somewhat, but you may be very close. Here is how I set it up: USG -> Networks -> WAN -> DNS Servers (DNS Servers) USG -> Networks -> (Network Name) -> DHCP Name Server: 192.168.2.220 (Pi-hole) [image] [image] Pihole -> Settings -> DNS -> Conditional forwarding (USG IP) I had to REBOOT THE USG …

thanks @jaykepeters its essentially the same as I have it. I am guessing this is something to do with the fact I am running pihole on docker on a synology box. The only thing I am not sure of with your settings is what you have as the DNS servers in pihole. Do you only have your custom upstream se…

Still no luck but I am trying enabling DNSMASQ as think this may help.... working progress! https://help.ubnt.com/hc/en-us/articles/115002673188-EdgeRouter-Using-dnsmasq-for-DHCP-Server

So it looks like: Enable DNSMASQ Disable 'Never forward FQDNs' Restart DNS Resolver in pihole Flush Logs in Pihole This is now picking up domains with the USG! Hope it helps someone and thanks @jaykepeters for your patience!

Can't get client hostnames

Help

jaykepeters October 18, 2019, 2:44am 10

Here's what I've got:

DNS Servers are set in the UniFi Controller. I had to reboot my USG for those changes to take effect. Deployment #2 was yesterday

But still don't have Pi-hole on our network yet...