# Blocked https links stall for 20 seconds

**URL:** <https://discourse.pi-hole.net/t/blocked-https-links-stall-for-20-seconds/7628>\
**Category:** Help\
**Created:** [February 28, 2018, 3:57pm UTC](https://discourse.pi-hole.net/t/blocked-https-links-stall-for-20-seconds/7628 "2018-02-28T15:57:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nachte](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/n/bb73d2/32.png) [@Nachte](https://discourse.pi-hole.net/u/Nachte)\
**Post date:** [February 28, 2018, 3:57pm UTC](https://discourse.pi-hole.net/t/blocked-https-links-stall-for-20-seconds/7628/1 "2018-02-28T15:57:34Z")

</div>

## Expected Behaviour:

block https scripts imediately

## Actual Behaviour:

https scripts time out after 22 seconds

## Debug Token:

tmh7xp4gk3

i'm having problems with pages that have blocked https links on them, the page stalls for about 22 seconds on them before returning status failed in the chrome debugger.

I have read [Why do some sites take forever to load when using Pi-hole? (for versions \< v4.0)](https://discourse.pi-hole.net/t/why-do-some-sites-take-forever-to-load-when-using-pi-hole/3654) and applied the iptables mentioned in there:

```
pi@raspberrypi:~ $ sudo iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
REJECT tcp -- anywhere anywhere tcp dpt:https reject-with tcp-reset
REJECT udp -- anywhere anywhere udp dpt:80 reject-with icmp-port-unreachable
REJECT udp -- anywhere anywhere udp dpt:443 reject-with icmp-port-unreachable

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

pi@raspberrypi:~ $ sudo ip6tables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
REJECT tcp anywhere anywhere tcp dpt:https reject-with tcp-reset
REJECT udp anywhere anywhere udp dpt:80 reject-with icmp6-port-unreachable
REJECT udp anywhere anywhere udp dpt:443 reject-with icmp6-port-unreachable

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

```

but this changes nothing. Is there anything else i could be missing?

Thanks!!

---

<div class="post-metadata">

**Author:** ![Nachte](https://discourse-cdn.pi-hole.net/letter_avatar_proxy/v4/letter/n/bb73d2/32.png) [@Nachte](https://discourse.pi-hole.net/u/Nachte)\
**Post date:** [February 28, 2018, 4:32pm UTC](https://discourse.pi-hole.net/t/blocked-https-links-stall-for-20-seconds/7628/2 "2018-02-28T16:32:54Z")

</div>

After posting this i found this link that if i understand it correctly says that my ipv6 address chagned: [Use IPv6 ULA addresses for Pi-hole](https://discourse.pi-hole.net/t/use-ipv6-ula-addresses-for-pi-hole/2127)

using the methids described in there made sites load at normal speeds again, i'll have to look into why my pi changed IPv6 adresses.

---

<div class="post-metadata">

**Author:** ![system](https://discourse.pi-hole.net/uploads/default/original/3X/7/c/7c8792f649eeb921c5d2b4c41564ffa873d9a2b8.png) [@system](https://discourse.pi-hole.net/u/system)\
**Post date:** [March 21, 2018, 4:33pm UTC](https://discourse.pi-hole.net/t/blocked-https-links-stall-for-20-seconds/7628/3 "2018-03-21T16:33:08Z")

</div>

This topic was automatically closed 21 days after the last reply. New replies are no longer allowed.